V-Ray renderer setup realistic visualization.

Greetings, in this tutorial we are going to setup the V-Ray renderer for having realistic visualization.

After you have installed V-Ray it needs to be activated. Go to menu item Rendering->Render Setup or use F10 hotkey.

In the window which appears you have to assign V-Ray renderer as a default one, so it will be used by 3d Max while rendering.

In this Render Setup window you can see lots of groups and subgroups of settings. Go to Commontab first. Find the Assign Renderer subgroup, and click on choosing button for the Production renderer setting. Window Choose Rendererappears having all the installed renders listed. Choose V-Ray, the window will be somewhat like this:

After you have V-Ray assigned as default renderer the setup window might slightly be changed.

Now it is time to do some render configuration.

Render resolution

In the Commontab, Common Parameters subgroup, Output Size parameters group is located. Here you can set the renderer’s output image size. For the test render it is best to set some low resolution, e.g. 640x640, thus save much time.

Once you’ve done that let’s move to the other settings.

Lightning

In the V-Raytab, you might find interesting V-RAY::Image sampler(Anatialiasing), please take a look at Adaptive DMC type.

After this let’s move to yet another setting, V-Ray Color mapping. The most often used type is Exponential.

Indirect illumination

Enable the On check box. That would allow us to apply settings.

Saturation – this parameter determines how much the objects will influence the color of the lightning in interior or exterior.

More in this block:

Primary bounces -> GI Engine – set Irradiance map

Secondary bounces -> GI Engine – set Light Cache

Like this:

Let’s go further and setup the V-Ray Irradiance map.

In Built-in preset block set Very high for the whole preset. Also enable Show calc. phase, it makes it possible for us to see what happens at the render time.

The “Very high” value has set the right values for most parameters. Now let’s make it “Custom” to do some enhancements.

Change the following parameters:

Min rate: set -2 for the test rendering and for the more quality render use something like -4.

Max rate: set it between -1 and 0 for the test rendering, for quality rendering set it somewhere between 1 and 2.

You can see these parameters in work while rendering the scene, by a number of times the little squares do the same piece of the image.

Set Sample lookup to Overlapping.

Ok, let’s move on to Light Cache.

Subdivs – set in dependence to the render’s resolution, e.g. for 640x480 300 would be sufficient. But for greater resolution it might be as big as 2000.

Enable Pre filter, use Nearest for the Filtersetting.

And enable Show calc. phase as well.

At this stage we have completed setting up main lightning setting. Let’s change some system parameters as well.

System settings

Go to Settingstab -> V-Ray::System.

Dynamic memory limit - this setting is set depending on the volume of operative memory on a computer. Say you’ve got 2 GB of RAM, 1000 MB is then certainly an option for you.

Render region division – determines the size of the square that you can see during render. The number of squares depends on how much processing core you have on the computer. The lesser the square is the faster it will be renderer, but the whole picture would take more time to render as V-Ray also will be computing joints between the squares. Optimal value would be something like 64x64 or 32x32.

Well this is it for the start )… We have set up the V-Ray renderer. You could always find more information in V-Ray manual.

After you have set up the renderer, it might be a time to start setting up the scene and placing the lights. This is to be covered in other tutorials.

154307

Bugün 11:12

Gönder

Laila_Bennington 07 2016.04.19 20:27

Teşekkür ederim!)

Спасибо!)

Ders üzerinde	V-Ray
Karmaşıklık	Orta
Yayınlanan	07.08.2012